Goodyear repiping
Repiping and Pipe Repair in Goodyear, AZ
Newer Goodyear homes can still have problem pipe, from brittle CPVC to failing fittings and Kitec. We replace what is failing and leave what is not.
- Partial repipes
- Problem pipe replacement
- Service lines
Problem Pipe in Newer Homes
Most Goodyear homes were built in the last twenty-five years, so galvanized pipe is not the issue here. But a few newer materials have their own track records.
Kitec. Some homes built in the late 1990s and 2000s used Kitec, a plastic and aluminum pipe, usually orange or blue, with brass fittings. The fittings are known to corrode and fail. If you see it, have it looked at.
CPVC. Can become brittle over time, especially in hot attics.
Fittings. Crimp and expansion fittings on PEX can fail if installation was rushed.
If you have had multiple leaks from the same kind of pipe or fitting, a targeted repipe is often worth it.
Partial Repipes Are Common
In Goodyear, we rarely need to replace every pipe in a house. More often, we replace one type of problem pipe, reroute lines that have leaked under the slab, or replace the hot water side. We look at your leak history and the materials in your home, then give you options.
For slab leaks, rerouting through the attic or walls avoids breaking up newer flooring. See leak detection in Goodyear for finding leaks first.
Service Lines and Pressure
We also replace water service lines from the meter to the house and install or replace pressure reducing valves. Pool, patio and landscaping projects sometimes damage service lines. If your bill jumped after a backyard project, the line may be the culprit.
For more on repiping materials and our process, see our main Peoria repiping page.
How to Spot Kitec
Kitec is a brand of plastic and aluminum composite pipe used in some homes built from the mid-1990s into the late 2000s. It was marketed as a durable alternative to copper, but its brass fittings are known to corrode and fail, and the pipe itself can degrade with high heat.
How to check for it in your Goodyear home:
- Look near the water heater for orange (hot) and blue (cold) pipe
- Look for the word “Kitec” or similar markings printed on the pipe
- Check under sinks for brass fittings on colored plastic pipe
- Look at the electrical panel, where some homes have a label noting plumbing type
If you find it, have it looked at. Replacing it before a fitting fails is much cheaper than dealing with water damage. Not every Goodyear home has Kitec, but it is worth ruling out.
Hear From Homeowners Around Goodyear
I cant stress enough how exceptional his service was. I knew my situation wasnt easy by any means but it was WAY more that I described too. He replaced the pipes and made it look amazing also. And the price was cheap! I WILL absolutely call him again if something plumber related comes up.
Randy Rosko
Alex helped me put my dream kitchen to life! I needed to move my sink to a perpendicular wall, which meant moving the drain and water lines. He communicated well throughout the project, even when issues came up. I would definitely hire him for any plumbing repairs in the future!
Tanya Klymenko
Goodyear Repiping FAQs
How do I know if I have Kitec pipe?
Look for orange (hot) or blue (cold) pipe with brass fittings, often near the water heater. We can confirm.
Does a newer home ever need a full repipe?
Occasionally, if a problem pipe type runs throughout the house. Partial repipes are more common.
Can a pool project damage my water line?
Yes, if the line runs through the work area.
Do you use PEX for repipes?
Usually, yes. Copper is available if you prefer.
Beyond Pipe Work: More for Goodyear Homes
More Goodyear services
- Drain cleaning in Goodyear
- Water heater repair in Goodyear
- Leak detection in Goodyear
- Sewer line repair in Goodyear
- Water softener installation in Goodyear
- Emergency plumber in Goodyear